Isophon Bars
Applications and typologies
Often used in combination with Isophon Light ™ panels, Isophon bars serve to reduce and dampen vibrations and noise, resulting from engine propulsion, aboard the most prestigious boats.
The bars are available in three different typologies to meet the needs of vibration reduction both on the floor and on the wall, thus guaranteeing the highest acoustic comfort inside the rooms.
Isophon Floor™
Ideal to make anti-vibration leveling floors for medium and large boats. Normally, the bars are laid down in grid pattern onto the floor, at 50 cm intervals, and to achieve the best soundproofing performance, they are covered with Isophon Light™. Excellent to isolate underfloor, decks and floors in touch with or very close to noise sources.
Isophon Floor Single - Side™
The single-side version offers the same features as the Isophon Floor™ bar, but only one plywood face. Therefore, rubber is glued directly onto the raw surface of the underfloor (fiberglass, aluminum, steel). This solution is preferable when a thinner product has to be processed or when the surface is uneven.
Isophon Wall™
The Isophon Wall™ variant is designed to be applied vertically onto walls and bulkheads next to the noise source. Combined with the Isophon Light™ panel, it is a perfect solution to soundproof and fight the propagation of vibration between environments with different destinations. Isophon Wall™ bars can be delivered pre-drilled and ready to be installed.
Size
- Bars / Strips
Standard size
- 3080 x 50 mm
- 2480 x 50 mm
Standard thicknesses
- From 18 to 50 mm
| Thickness | Configuration | Weight |
|---|---|---|
| mm | mm | kg/m |
| 26 | 8+10+8 | 0,6 |
| 30 | 10+10+10 | 0,7 |
| 40 | 15+10+15 | 0,9 |
| 36 | 8+20 + 8 | 0,8 |
| 40 | 10+20 + 10 | 0,9 |
| 50 | 15+20+15 | 1,2 |
| Thickness | Configuration | Weight |
|---|---|---|
| mm | mm | kg/m |
| 26 | 8+10+8 | 0,6 |
| 30 | 10+10+10 | 0,7 |
| 40 | 15+10+15 | 0,9 |
| 36 | 8+20 + 8 | 0,8 |
| 40 | 10+20 + 10 | 0,9 |
| 50 | 15+20+15 | 1,2 |
| Thickness | Configuration | Weight |
|---|---|---|
| mm | mm | kg/m |
| 18 | 8+10 | 0,4 |
| 20 | 10+10 | 0,5 |
| 25 | 15+10 | 0,6 |
| 28 | 8+20 | 0,6 |
| 30 | 10+20 | 0,7 |
| 35 | 15+20 | 0,8 |
Features
- High Anti-vibration properties
- Weight from 0.40 kg/ml (in 18 mm configuration - Single-sided)
- Excellent durability in environments with high humidity and salinity
Composition
- Composed of outer faces (skins) of Okoume Marine Plywood
- 440 kg/m³ medium-density cork rubber core
- Gluing with melamine adhesive in Class 3 (See Specifications)
How to install Isophon bars
Technical information
The parts in Okoume are manufactured in compliance with NF CTB-X exterior plywood standards. They have obtained the CE marking for structural use in external environment, according to EN 13896 standards.
Depending on the specific characteristics, Isophon Bars ™ can be requested with parts in plywood of Okoumè FSC certified mixed or FSC 100%.
The bonding of the compensated Okoumè used are in Class 3 – E1, therefore resistant to boiling ´ and ideal for external uses; are carried out according to EN 314.2.
Nota Bene - Class E0
Isophon Bars™ can be made entirely of Class E0 (no added formaldehyde) upon request.
Certifications and marking
Download
Download the technical data of Isophon Bars with dimensions, weights and useful information. Italian version.
Download the technical data of Isophon Bars with dimensions, weights and useful information. English version.
Similar and related products
Nothing was found.
Isophon Mass
Applications
Isophon Mass ™ is the soundproofing Sandwich panel used by major shipyards to increase comfort on board. Thanks to the use of a thin layer of high-density rubber core, it is possible to reduce the noise significantly avoiding the use of bulky and thick materials. The versatility and the ease of application make Isophon Mass ™ a suitable product for civil and industrial constructions as well.
Among the applications:
Boatbuilding
Flooring, cabins, soundproofed boxes, load-bearing bulkheads, partition walls.
Constructions
Roller shutter boxes, doors, walls, flooring.
Size
- Rectangular panels (ratio 2:1)
Standard sizes
- 2480 x 1200 mm
Standard thicknesses
- From 12 to 26 mm
| Thickness | Configuration | Weight |
|---|---|---|
| mm | mm | kg/m2 |
| 12 | 4+4+4 | 11,8 |
| 16 | 6+4+6 | 13,8 |
| 18 | 6+6+6 | 17,8 |
| 20 | 8+4+8 | 15,7 |
| 22 | 8+6+8 | 19,7 |
| 24 | 10+4+10 | 17,6 |
| 26 | 10+6+10 | 21,6 |
Features
- High acoustic insulation even with low thicknesses (certified average value of 36 DB)
- Weight from 11.80 kg/m² (in 12 mm configuration)
- Excellent durability and mechanical strength in environments with high moisture and salinity
- Face quality (surface layers): B/BB
- Non-toxic, the rubber core is lead-free
- Easy to process
- Each piece is calibrated across the entire surface
- The panel is supplied already squared and sanded
Composition
- Composed of outer faces (skins) of Okoume Marine Plywood
- High-density rubber sheath core of +/- 2000 kg/m³ available from 2 to 6 mm
INFORMAZIONI TECNICHE
The parts in Okoume are manufactured in compliance with NF CTB-X exterior plywood standards. They have obtained the CE marking for structural use in external environment, according to EN 13896 standards.
Depending on the specificities, Isophon Mass ™ can be requested with faces in plywood of Okoumè FSC certified mixed or 100% FSC.
The bonding of the compensated Okoumè used are in Class 3 – E1, therefore resistant to boiling ´ and ideal for external uses; are carried out according to EN 314.2.
Nota Bene - Class E0
Isophon Mass™ can be made entirely of Class E0 (no added formaldheyde) upon request.
Certifications and marking
Download
Download the data sheet of Isophon Mass with dimensions, weights and useful information. Italian version.
Download the data sheet of Isophon Mass with dimensions, weights and useful information. English version.
Finishing
All our plywood, sandwich and specialty panels can be delivered with different kinds of surface finishing, according to their destination.
Similar and related products
Nothing was found.
Isomar + Isophon Light
Applications
The Isomar + Isophon Light ™ panel is applied in projects requiring a low weight, high mechanical characteristics and excellent sound insulation performance. Developed to meet the needs of shipbuilding and recreational yacht building, the panel is also suitable for works in the construction sector.
Among the applications:
Boatbuilding
Structural walls and bulkheads, engine compartments and load-bearing partitions in general, requiring acoustic insulation.
Constructions
Prefab houses and house boats, partition walls with incorporated conduits, mezzanines.
Size
- Rectangular panels (ratio 2:1)
Standard sizes
- 3080 x 1510 mm
- 2480 x 1200 mm
Standard thicknesses
- From 38 to 60 mm
| Thickness | Configuration | Weight |
|---|---|---|
| mm | mm | kg/m2 |
| 38 | 9+20+9 | 11,9 |
| 40 | 9 + 22 + 9 | 12,1 |
| 42 | 11+20+11 | 13,9 |
| 44 | 11+22+11 | 14,0 |
| 47 | 11+25+11 | 14,2 |
| 51 | 13+25+13 | 16,2 |
| 52 | 15+22+15 | 17,9 |
| 55 | 15+25+15 | 18,1 |
| 56 | 13+30+13 | 16,5 |
| 60 | 15+30+15 | 18,5 |
Features
- High acoustic insulation (certified average value of 35.6 dB)
- Weight from 11.90 kg/m² (in 38 mm configuration)
- Excellent durability in environments with high humidity and salinity
- PET core layer ensures lightness even on significant thicknesses
- Excellent mechanical properties
- Good thermal insulation
- Squared and sanded before delivery
Composition
- Composed of outer faces (skins) of Isophon Light ™
- Polyethylene terephthalate PET cellular foam core
- Gluing with melamine adhesive in Class 3 (See Specifications)
Technical information
The parts in Okoume are manufactured in compliance with NF CTB-X exterior plywood standards. They have obtained the CE marking for structural use in external environment, according to EN 13896 standards.
Depending on the specific characteristics, Isomar + Isophon Light ™ can be requested with plywood faces of Okoumè FSC mixed or 100% FSC certified.
The bonding of the compensated Okoumè used are in Class 3 – E1, therefore resistant to boiling and ideal for external uses; are carried out according to EN 314.2.
Nota Bene - Class E0
Isomar + Isophon Light™ can be ordered entirely in Class E0 (No Added Formaldehyde) upon request.
Certifications and marking
Download
Download the technical Data sheet of Isomar + Isophon Light with dimensions, weights and useful information. Italian version.
Download the technical Data sheet of Isomar + Isophon Light with dimensions, weights and useful information. English version.
Finishing
All our plywood, sandwich and specialty panels can be delivered with different kinds of surface finishing, according to their destination.
Similar and related products
Nothing was found.
Isomar
Applications
Specifically designed to meet the lightweighting needs of the marine industry, Isomar™ combines the performance of marine plywood with the lightness and flexibility of composite materials. Widely appreciated and successfully used for more than 25 years by major shipyards, Isomar™ equips thousands of vessels worldwide.
Among the applications:
Boatbuilding
Partition and structural bulkheads, flooring, underlayments, furniture items (also veneered), cabinet doors, tables, furniture shoulders, wardrobe bases, ceilings
Size
- Rectangular panels (ratio 2:1)
Standard sizes
- 3080 x 1510 mm
- 2480 x 1200 mm
Standard thicknesses
- From 16 to 40 mm
| Thickness | Configuration | Weight |
|---|---|---|
| mm | mm | kg/m2 |
| 16 | 3+10+3 | 3,9 |
| 18 | 4+10+4 | 4,8 |
| 20 | 4+12 + 4 | 5,0 |
| 21 | 3+15 + 3 | 4,4 |
| 23 | 4+15 + 4 | 5,3 |
| 26 | 3+20 + 3 | 4,9 |
| 27 | 6+15 + 6 | 7,3 |
| 28 | 4+20 + 4 | 5,8 |
| 32 | 6+20 + 6 | 7,8 |
| 36 | 8+20 + 8 | 9,7 |
| 40 | 10+20 + 10 | 11,6 |
Features
- Lightness: for the same thickness offers greater stiffness and up to 65% lower weight compared to the Okoume Marine Plywood Commonly employed for the same applications (above 28 mm)
- Weight from 3.90 kg/m² (in 16 mm configuration)
- Excellent durability In high humidity and salinity environments
- Excellent dimensional stability, Maintains a considerable degree of flatness and is not subject to twisting
- It offers a good thermal insulation
- Excellent stiffness
- The core layer made of polyethylene terephthalate cellular foam. PET Is not hygroscopic, thus does not absorb water or ambient humidity
- Eco-friendly: PET is a recycled, recyclable and environmentally sustainable polymer: it is a material with a very low environmental impact. It is a closed-cell thermoplastic material and has excellent resistance to high temperatures (up to 150° C). It does not deform or alter its structure.
- The panel is supplied already squared and sanded
Composition
- Composed of outer faces (skins) of Okoume Marine Plywood
- Face quality (surface layers): B/BB
- Cellular foam core of polyethylene terephthalate, known as PET
- Gluing with melamine adhesive in Class 3 (See Specifications)
Technical information
The parts in Okoume are manufactured in compliance with NF CTB-X exterior plywood standards. They have obtained the CE marking for structural use in external environment, according to EN 13896 standards.
Depending on the specifics, Isomar™ can be requested with mixed FSC or FSC 100% certified Okoumè Plywood faces.
The bonding of the compensated Okoumè used are in Class 3 – E1, therefore resistant to boiling and ideal for external uses; are carried out according to EN 314.2.
Nota Bene - Class E0
Isomar™ can be made with NAF adhesive on request: formaldehyde-free bonding that enables emission values well below the requirements of the standard.upon request.
Availability
Upon request
Lead time
3/4 weeks
Minimum order
1 panel.
Certifications and marking
Download
Download the technical Data sheet of Isomar PET with dimensions, weights and useful information. Italian version.
Download the technical Data sheet of Isomar PET with dimensions, weights and useful information. English version.
Finishing
All our plywood, sandwich and specialty panels can be delivered with different kinds of surface finishing, according to their destination.
Similar and related products
Nothing was found.
Isomar HC
Applications
Isomar HC™ is suitable for both nautical and residential furnishing purposes. Its honeycomb composition makes it excellent for all non-structural parts.
Among the applications:
Boatbuilding
Ceilings, furniture items, cabinets, sliding cabinet doors, non-structural partitions.
Furniture and interior design
Cabinet sliding doors, interior fittings, furniture.
Size
- Rectangular panels (ratio 2:1)
Standard sizes
- 3080 x 1510 mm
- 2480 x 1200 mm
Standard thicknesses
- 18 to 40 mm
| Thickness | Configuration | Weight |
|---|---|---|
| mm | mm | kg/m2 |
| 18 | 4+10+4 | 4,6 |
| 23 | 4+15 + 4 | 5,0 |
| 28 | 4+20 + 4 | 5,4 |
| 31 | 3+25+3 | 4,9 |
| 33 | 4+25+4 | 5,8 |
| 40 | 10+20 + 10 | 11,2 |
Features
- Extremely light, for the same thickness it offers greater stiffness and up to 68% lower weight compared to the Okoume Marine Plywood commonly used for the same applications
- Weight from 3.50 kg/m² (in 14 mm configuration)
- Excellent durability in environments with high humidity and salinity
- Exceptional planarity
- Excellent dimensional stability
- Durable core layer, unalterable over time
- Squared and sanded before delivery
Composition
- Faces in Okoume Marine Plywood
- Face quality (surface layers): B/BB
- Core layer: honeycomb polypropylene sheet with 80 kg/m³ density
- Gluing with melamine adhesive in Class 3 (See Specifications)
Technical information
The parts in Okoume are manufactured in compliance with NF CTB-X exterior plywood standards. They have obtained the CE marking for structural use in external environment, according to EN 13896 standards.
Depending on the specificities, Isomar HC ™ can be requested with a Okoumè of FSC mixed or FSC 100% certified plywood faces.
The bonding of the compensated Okoumè used are in Class 3 – E1, therefore resistant to boiling and ideal for external uses; are carried out according to EN 314.2.
Nota Bene - Class E0
Isomar HC™ can be made entirely in Class E0 (no added formaldehyde) upon request.
Certifications and marking
Download
Download the Isomar HC Technical data sheet with dimensions, weights and useful information. Italian version.
Download the Isomar HC Technical data sheet with dimensions, weights and useful information. English version.
Finishing
All our plywood, sandwich and specialty panels can be delivered with different kinds of surface finishing, according to their destination.
Similar and related products
Nothing was found.
Isomar Screw
Applications
Designed as an evolution of the Isomar™ panel, the Screw version finds similar applications by meeting the specific needs of those who need to attach superstructures or moving parts to the panel.
Boatbuilding
Partition and structural bulkheads, flooring, underlayments, hatches, furniture items (also veneered), cabinet doors, tables, furniture shoulders and frameworks, wardrobe bases, ceilings.
Constructions
Roller shutter boxes, false ceilings, doors, prefab houses.
Size
- Rectangular panels (ratio 2:1)
Standard sizes
- 3080 x 1510 mm
- 2480 x 1200 mm
Standard thicknesses
- 24 to 52 mm
| Thickness | Configuration | Weight |
|---|---|---|
| mm | mm | kg/m2 |
| 24 | 4+6+4+6+4 | 7,0 |
| 32 | 4+10+4+10+4 | 7,6 |
| 42 | 4+15+4+15+4 | 8,4 |
| 52 | 4+20+4+20 | 9,4 |
Features
- Lightweight: extremely lightweight, for the same thickness it offers a improved rigidity and weight savings of up to 60%. compared to the Okoume Marine Plywood commonly used for the same applications
- Excellent durability In high humidity and salinity environments
- Excellent screw seal thanks to the central reinforcement layer made of Okoume Marine Plywood
- Excellent dimensional stability, maintains a considerable degree of flatness and is not subject to torsion
- Eco-friendly: The core is made of polyethylene terephthalate cellular foam. PET. It is an environmentally sustainable material with very low environmental impact and easily recyclable
- PET is a closed-cell thermoplastic polymer and is not hygroscopic, so it does not absorb water or environmental moisture
- Another characteristic of PET is its excellent resistance to high temperatures (up to 150° C).
- The panel comes already squared and sanded
Composition
- Composed of outer faces (skins) of Okoume Marine Plywood .
- Face quality (surface layers): B/BB
- Polyethylene terephthalate PET cell foam core
- Inner layer in Okoume marine plywood for improved screw pullout strength
- Gluing with melamine adhesive (See Specifications)
Technical information
The parts in Okoume are manufactured in compliance with NF CTB-X exterior plywood standards. They have obtained the CE marking for structural use in external environment, according to EN 13896 standards.
Depending on the specifics, Isomar Screw™ can be requested with mixed FSC or FSC 100% certified Okoumè Plywood faces.
The bonding of the compensated Okoumè used are in Class 3 – E1, therefore resistant to boiling and ideal for external uses; are carried out according to EN 314.2.
Other configurations are available upon request.
Nota Bene - Class E0
Isomar Screw™ can be made in Class "E0" (No Added Formaldehyde) upon request.
Certifications and marking
Download
Download the Isomar Screw data sheet with dimensions, weights and useful information. English version.
Download the Isomar Screw data sheet with dimensions, weights and useful information. English version.
Finishing
All our plywood, sandwich and specialty panels can be delivered with different kinds of surface finishing, according to their destination.
Similar and related products
Nothing was found.