What are the dimensional tolerances?
Reply
Dimensional tolerances are in accordance to standards EN 315 and EN 324-1.2 . See the table:
| Unsanded panels | ||
|---|---|---|
| nominal thickness (t) mm | Thickness tolerance throughout a panel mm | tolerances on nominal thickness mm |
| 3 ≤ t ≤ 12 | 1,0 | + (0.8 + 0, 03t) |
| 12 ≤ t ≤ 25 | 1,5 | -(0.4 + 0, 03t) |
| Sanded panels | ||
|---|---|---|
| nominal thickness (t) mm | Thickness tolerance throughout a panel mm | tolerances on nominal thickness mm |
| 3 ≤ t ≤ 12 | 0,6 | + (0.2 + 0, 03t) |
| 12 ≤ t ≤ 25 | 0,6 | -(0.4 + 0, 03t) |
Tolerances for squareness and edge straightness: 1 mm/M
Length and width tolerances: ± 3.5 mm